• JPRO 2026v3

1 pc . Remote installation

JPRO OFF-HIGHWAY FEATURES:

  • Off-Highway supports Caterpillar Off-Highway engines.
  • Supports SAE J1939 messages.
  • Ability to save and playback log files for Off-Highway specific connections.

 SUPPORT FOR CATERPILLAR (OFF-HIGHWAY)

  • Supports reading proprietary diagnostic fault codes, event codes, and data for the following Caterpillar engines on Off-Highway vehicles:
    • C4.4, C6.6, C7.1, C9.3, C9.3B

JPRO HEAVY-DUTY FEATURES:

  • Now supports trailer diagnostics using the Universal J560 PLC Adapter combined with a DLA+ 2.0, DLA+, DLA+ 2.0 Wireless, DLA+ Wireless, or DLA+ PLC adapter.
  • ECU product names are now displayed instead of generic source descriptions in fault and data displays throughout the application.

GENERAL FEATURES

  • Only Noregon DLA+ 2.0, DLA+ 2.0 Wireless, Trailer Diagnostic Adapter, DLA+, DLA+ Wireless, and DLA+ PLC adapters are supported.

Heavy-Duty: CATERPILLAR (ON-HIGHWAY)

NEW Bi-Directional support for Caterpillar engines:

  • Cruise Control Speed Limits
    • Low Cruise Control Speed Limits, High Cruise Control Speed Limit
      • 3126, C7, C12, C13, C15, and C18
  • Idle Shutdown
    • Idle Shutdown Time, Idle Shutdown Override
      • 3126, C7, C12, C13, C15, and C18
  • Maximum Vehicle Speed Limit
    • Vehicle Speed Limit
      • 3126, C7, C12, C13, C15, and C18

Heavy-Duty: Cumming

Additional Bi-Directional support for Cummins engines:

  • Fuel Injector Performance Test
    • EPA10 all ISX (12 & 15L) | EPA 13 all ISX (12 & 15L)  | GHG17 all L9, X12, X15

Heavy-Duty: DETROIT DIESEL

Additional Bi-Directional support for Detroit Diesel engines:

  • Cylinder Cut Out:
    • Now supports GHG17 and newer with
      engine software version: App_3105, App_3106, App_3107 and GHG17 and newer with MCM software version: mcm_0x60EF
  • DEF Coolant Valve Control Test
    • Now supports GHG17 and newer with MCM software version: mcm_0x6EF and GHG17 and newer with ACM software version: acm_0x0250
  • DEF Quantity Test
    • Now supports GHG17 and newer with ACM software version: acm_0x0250
  • DPF Service Regen
    • Now supports GHG17 and newer with engine software version: App_3105, App_3106 App_3107
  • Hydrocarbon Doser Purge
    • Now supports GHG17 and newer with MCM software version: mcm_0x06EF
  • Parked SCR Efficiency Test
    • Now supports GHG17 and newer with ACM software sersion: acm_0x0250
  • Performance Check Low Temp ATD
    • Now supports GHG17 and newer with MCM software version: mcm_0x06EF
  • SCR Airless Doser System (ADS) Self-Check
    • Now supports GHG17 and newer with ACM software version: acm_0x0250
  • SCR Output Component Test
    • Now supports GHG17 and newer with ACM software version: acm_0x0250

Heavy-Duty: PACCAR

  • Supports reading proprietary diagnostic fault codes for
    CECU3 500 and VECU controllers.
  •  Additional Bi-Directional support for Paccar engines:
    • Check Internal DEF Pump Module Heater
      • supported  on EPA 13 all MX Engines.

Heavy-Duty: Bendix

  • Bendix proprietary fault codes will include the SAE
    SPN or SID, and FMI in the displayed fault description.
  • Bendix DTC Report updated to include Event Counters, ESP Counters, and VINs/Chassis Ids from all components that report it.
  • Bendix Data Reporting (BDR) fi le is now generated for EC-80 braking systems when the DTC report is printed or submitted.
  • Supports faults, data, and tests for EC-80 ROM 4.1
    and ROM4+ braking systems.
  • Supports reading fault codes and sensor data
    for Bendix EC-80 EAC (Electronic Air Controller
    components.

Bendix Tractor Brakes

  • Event History supports reading Event Counters and ESP Counters for EC-80 braking systems.
  • CPC Confi guration Layout displays Central Pressure Controller diagram for the reported EC-80 CPC.
  • Additional Bi-directional support for Bendix tractor brakes
    • ABS Configuration
      • Now supports Broadcast configuration for all EC-60 braking system and Rail Mode for EC-80 ABS braking systems.
    • ATC Configuration
      • ATC Control & Traction Control Switch
        • Supports EC-80 ATC or ESP braking systems
    • Modulator Valve (Chuff) Tests
      • Updated for CPC support on EC-80 braking systems

Trailer Brakes 

  • Supports reading proprietary fault codes and SAE
    sensor data for Bendix® TABS-8® Trailer ABS module.

Driver Assistance Systems (DAS)

  • Sheppard Active Steering component data and faults support added.
  • SDP Confi guration test now supports updating shared parameters to EC-80 braking systems as well as the FLC20.
  • SDP3/SDP5 Configuration test now supports updating shared parameters to EC-80 braking systems as well as the SafetyDirect® Web Portal Processor (3G and 5G).
  • Additional Bi-Directional support for Bendix Driver Assistance Systems:
    • Coil Polarity check supported on Sheppard Active Steering components.
    • Presuure Trimming Test supported on Sheppard Active Steering components.
    • Safety Direct Event Configuration
      • SD Event Collection, SD Event Triggers, SD Min Speeds
        • supported on AutoVue® 3G LDW System and SafetyDirect® Web Portal Processor (3G and 5G)

Tire Pressure Monitor Systems (TPMS)

  • TPMS key data points screen displays tire pressure and temperature data for confi gured sensor ID’s.
  • Bi-Directional Support for Bendix TPMS:
    • TPMS Parameters
      • Antennae Configuration
        • Now supports Internal Antenna configuration for SmarTire™
          NextGen TNC solutions.
    • TPMS Service Replacement supported on all SmarTire™ TPMS solutions.

JPRO 2026v3

  • Product Code: JPRO
  • Availability: In Stock
  • USD95


Featured

Cummins Insite 10.1

Cummins Insite 10.1

Cummins Insite 10.1 Pro with Professional level access.Language: English, Chinese, Czech, Danich, Du..

USD80

Cummins Calterm 5.16

Cummins Calterm 5.16

Type: Diagnostic and calibration  Language: English OS: Win 10, Win 11, Win 8, Win 7, Win Vis..

USD99

Cummins Calterm tutorial

Cummins Calterm tutorial

Cummins Calterm tutorial..

USD29

Cummins Inpower 16 + Incal 2025

Cummins Inpower 16 + Incal 2025

Type: Diagnosis Software Region: All regions Language: Multi-languages os: Wi..

USD89

Установка

ChipTuning Truck

Chiptuning means that the software in the engine control unit is optimised, leading to an improvement of vehicle performance. This is why chiptuning is also often referred to as software tuning. To improve the performance of your vehicle, several parameters such as amount of fuel, injection time and boost pressure are adjusted to each other.



Results of Chiptuning

A chiptuning of your vehicle, or, more precisely, the software tuning of your truck, can lead to a torque increase by up to 20%. Furthermore, up to 20% more ps and a reduction of fuel consumption by up to 5-15% are possible



Higher Performance, Lower Consumption! How does that work?

From a technical viewpoint, a reduction of fuel consumption is very often one of the side effects of chiptuning. Fuel consumption is automatically lowered due to a shift of torque and the subsequent driving at low engine speed. Of course only if you stick to your normal driving style.  After chiptuning, your vehicle has the same power at a lower torque as compared to before with a higher torque.




 Results of Chiptuning at a Glance

Performance improvement between 5% and 20%

Torque increase between 5% and 20%

Reduction of fuel consumption after chiptuning


Frequently Asked Questions

Why do the vehicle manufacturers not carry out the chiptuning themselves?

The manufacturer develops a vehicle for the international market. In doing so, they have to consider various framework conditions such as national emission standards, regional differences in temperature, different types of fuel or specific categories of insurances in different countries. This means that an ex-works vehicle needs to be equipped for a wide range of different influencing factors. The adjustment of the above-mentioned parameters to one single target market can therefore be carried out only by chiptuning.


Does Chiptuning Shorten Engine Life?

 This depends on the degree of the chiptuning modifications. If no limit values are exceeded during the software tuning and you have a “normal” style of driving, no increased wear is to be expected. If the requested modifications deviate from normal standards and/or your driving style does not comply to “normal” standards, the same signs of wear as the engine would be exposed to without chiptuning are to be expected.


 Is Chiptuning Possible for my Truck?

Check our truck list for trucks we have already tuned. If your type of truck is not on the list, do not hesitate to contact us via phone or e-mail.